Attic Spray Foam Insulation Georgetown, TX 78626

Spray Foam Insulation in Georgetown, TX (78626) · Local Professionals

Austin Spray Foam Insulation · Fast response in Georgetown and the Austin area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Georgetown (78626) sits where Victorian homes around the courthouse square meet fast-growing subdivisions and Sun City, and nearly every one of them has the same problem: a vented attic that hits 140 to 160 degrees on a 100-degree summer day, with ductwork running through it and no insulation in the walls below.

That's why Georgetown homeowners and property managers call Austin Spray Foam Insulation. We've been sealing and insulating homes across the Austin area since 2012, and we know Georgetown's mix of older pier-and-beam construction, newer slab-built two-stories with bonus rooms, and the metal buildings and barndominiums on the acreage north of town. We show up on time, we spray it right, and we're here to answer questions after the work is done.

Spray Foam Insulation in Georgetown (78626)

Georgetown's housing stock runs the full spectrum. The historic homes near the courthouse sit on pier-and-beam with open crawl spaces underneath and attics that were blown with fiberglass decades ago and have settled into nothing. The subdivisions west and north of downtown are slab-built two-stories with bonus rooms over garages and closed wall cavities that were never insulated in the first place. And out past the city limits, barndominiums and metal buildings sweat without closed-cell foam to stop condensation and air leakage.

The problem is the same everywhere in Georgetown: summer cooling bills that have become unaffordable, bonus rooms that never get cool, and attics where the ductwork and water lines sit exposed to 160-degree heat. Closed crawl spaces under older homes collect moisture and compressed insulation that has to come out before anything new goes in. Wall cavities in 1950s and 1960s ranch homes are empty, and that empty space is where the conditioned air leaks out and the heat leaks in.

Our team has been doing this work in Georgetown and across the Austin area for over a decade. We spray attics, walls, crawl spaces, and rim joists. We remove fouled or compressed insulation and replace it. We seal the air leaks around ductwork, electrical penetrations, and rim band joists. We work with open-cell and closed-cell foam, and we specify thickness and R-value in writing before we start.

Our services in Georgetown

Attic Spray Foam Insulation in Georgetown · Open-cell foam on the roof deck turns a 150°F Austin attic into conditioned…
Closed Cell Spray Foam Insulation in Georgetown · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Georgetown · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Georgetown · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Georgetown · Closed-cell foam on pier-and-beam subfloors and crawl space skirts stops cold…
Rim Joist & Band Joist Spray Foam in Georgetown · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Georgetown · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Georgetown · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Georgetown · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Georgetown · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Georgetown · The full reset: old material removed; gaps air-sealed…
Air Sealing in Georgetown · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Georgetown

You call us at (737) 404-4885 or request an estimate online. We schedule a time to walk through your home and look at the attic, the crawl space, the walls, or the metal building. We take measurements, ask about comfort problems or moisture issues, and talk through open-cell versus closed-cell foam and why one makes sense for your space. We give you a written estimate with R-value and thickness specs, so you know exactly what you're paying for.

When the work starts, we set up mechanical ventilation in the space being sprayed. Spray foam needs air movement during cure, and we run fans to pull fresh air through. If there's old insulation that's damp or fouled or compressed, we remove it first. We don't spray over a wet substrate or standing water, and we don't spray over contamination. We fix the moisture first or we walk away. Once the foam is down at the thickness and ratio we specified, we let it cure with ventilation running.

Re-entry into the space is typically twenty-four to forty-eight hours after the spray, depending on temperature and humidity. We clean up our equipment and the property, walk you through the finished work, and answer any questions you have. You get a receipt with the R-value and thickness we installed, and you know how to reach us if something comes up later.

Pricing for spray foam in Georgetown depends on what you're insulating, how much area needs to be covered, how thick the foam needs to be, whether you're using open-cell or closed-cell, and whether old insulation has to come out first. An attic top-up with open-cell foam on a 1,200-square-foot ranch home in a Georgetown subdivision typically runs from $1.50 per square foot. Wall injection foam into the cavities of an older home costs more per square foot because the work is slower and requires drilling and patching. A crawl space under a pier-and-beam home usually starts around $2,500 and goes up with the square footage. Removing and replacing fouled insulation in an attic can run $2,800 to $5,000 or more depending on the volume and access. Closed-cell foam costs more than open-cell because it's denser and carries a higher R-value per inch, but it stops moisture and air leakage in ways open-cell cannot. Call us at (737) 404-4885 for a free on-site estimate. We'll measure, ask the right questions, and give you a realistic number for your specific job.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Georgetown and nearby areas.

I have a bonus room over the garage in my Georgetown subdivision home, and it never cools down even though the air conditioner runs all day. What's the problem?

That room is almost always sitting directly over a garage with an attic above it, and that attic has no insulation or very thin original fiberglass that has settled. The heat radiates down through the ceiling into the room, and the ductwork running through the attic is losing conditioned air to a 150-degree space. Spray foam insulation in the attic above that room, combined with air sealing around the ductwork, will drop the room temperature 10 to 15 degrees. Call us at (737) 404-4885 and we'll look at it.

I have an older pier-and-beam home in Georgetown with a crawl space underneath, and I can see moisture on the wood and smell dampness when I go under there. Do I need to encapsulate the whole crawl space, or can spray foam fix it?

Spray foam alone won't fix a damp crawl space, and we won't spray over wet wood or a wet substrate. The moisture has to be addressed first. That might mean grading soil away from the foundation, adding drainage, or installing a sump pump. Once the crawl space is dry, we can spray closed-cell foam on the rim and band joists and the underside of the floor to stop air leakage and keep moisture from migrating up into the house. Encapsulation (a plastic vapor barrier over the entire floor) is a separate service that a crawl space specialist handles. We'll tell you honestly what needs to happen before we spray anything.

What does spray foam insulation cost for an attic in Georgetown, and what factors change the price?

Attic foam typically starts at $1.50 per square foot for open-cell and goes higher for closed-cell. The cost depends on how much area you're covering, how thick the foam needs to be to hit your R-value target, whether you're using open-cell or closed-cell, and whether old insulation has to be removed first. A 1,200-square-foot attic with 4 inches of open-cell foam might run $1,800 to $2,400. A 2,000-square-foot attic with removal and 5 inches of closed-cell could run $4,000 to $6,000. We give you a free estimate with the exact square footage, thickness, R-value, and material cost spelled out. Call (737) 404-4885.

Who decides what R-value and thickness of insulation I need in my Georgetown home, and how do I know the work meets code?

The energy code in force at your address and your local building official set the R-value requirement. Georgetown follows the energy code adopted by the City of Georgetown, and you can confirm the specific requirements by contacting the City of Georgetown or checking the City of Georgetown website at https://georgetown.org. We specify R-value and thickness in our written estimate before we start, and if your job requires a permit, the building official will inspect the finished work. We don't set the rules, but we follow them and we help you understand what applies at your address.

Can we stay in the house while you spray foam in the attic, and how long until the smell goes away?

Yes, you can stay in the house. We run mechanical ventilation during the cure to pull fumes out of the attic and out of the house. The smell is strongest during the spray and the first few hours after, and it fades as the foam cures. We typically recommend staying out of the attic itself for twenty-four to forty-eight hours, depending on temperature and humidity. The rest of the house is fine. Open windows and run your HVAC system to circulate air. The smell is gone in a few days.

Are you insured if something goes wrong during the spray foam work at my Georgetown property?

Yes. We are fully insured with general liability and workers' compensation coverage. We carry the insurance that protects you and your property during the work. Ask us for proof of coverage before we start.

I'm planning a spray foam project in Georgetown for this summer. Is that the right time, or should I wait?

Summer is actually the hardest time to spray foam because heat and humidity slow the cure and make it harder to hit the right thickness and ratio. Spring and fall are ideal, with mild temperatures and lower humidity. But we work year-round in Georgetown, and if your cooling bills are out of control right now, we can schedule the work and get it done. Winter in Georgetown is mild but punctuated by hard freezes, so we have to be careful with temperature and cure time. Call (737) 404-4885 and we'll talk about timing for your specific job.