Serving the Austin area  ·  (737) 404-4885  ·  Open Mon-Sat 7am-6pm
📞 (737) 404-4885 Free Quote

Spray Foam Insulation in Manor, TX (78653) · Local Professionals

Austin Spray Foam Insulation · Fast response in Manor and the Austin area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+29Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Manor's new subdivisions east of Austin are built two-story on concrete slabs with ductwork and water lines running through hot attics that hit 140 degrees on summer afternoons. Those homes need spray foam insulation and air sealing to keep the cool air in and the heat out, and to protect the water lines when the freeze comes.

Austin Spray Foam Insulation has been serving Manor and the surrounding Austin area since 2012. We handle attic foam, wall injection, crawl space sealing, and the removal and replacement of old insulation. Our crews are fully insured and we show up on time with a written estimate that spells out the R-value and thickness you are paying for, so there is no guessing what gets sprayed.

Spray Foam Insulation in Manor (78653)

Manor's growth corridor runs east of Austin with newer two-story homes built on slab foundations. The challenge is the attic. In summer, ductwork and water lines sit in an uninsulated or poorly insulated attic that reaches 140 to 160 degrees on the string of 100-degree days we get every July and August. That heat radiates down through the ceiling into the rooms below, and the air conditioning has to work twice as hard to cool them. In winter, when a hard freeze comes (like Winter Storm Uri in 2021 or the 2023 ice storm), water lines in an uninsulated attic can burst and flood the house. Closed-cell spray foam seals and insulates in one pass. It stops the heat, keeps the cold out, and protects the lines.

Older homes in Manor and the surrounding area often have closed walls with no cavity insulation, or crawl spaces under pier-and-beam construction where moisture collects and insulation deteriorates. We handle wall injection foam and crawl space sealing. We have been doing this work for over a decade, and we know the building stock and the code that applies in Manor.

Our services in Manor

How a Job Works in Manor

We start with a free on-site assessment. We walk the attic or crawl space, measure the area, and talk through what needs to happen. If old insulation is damp, compressed, or fouled, we price the removal and disposal. We give you a written estimate with the R-value, thickness, and cost per square foot or board foot, so you know exactly what you are getting and what it will cost.

On the day of the work, our crew sets up mechanical ventilation and protective barriers. We spray the foam to the thickness and R-value in your estimate, controlling the pass thickness and the material ratio so it cures properly. During the cure, the space is vented. We ask you to keep the area clear for 24 to 48 hours before you move back in or use the space. We clean up the site when we are done.

If you are having insulation removed and replaced (a common job in Manor where old attic fill has failed), we remove the old material, bag and haul it, air out the space, and then spray the new foam. If there is moisture or a leak, we identify it first. We do not spray over wet substrate, and we do not fix roof leaks or standing water in a crawl space. We fix the moisture first or we walk away.

Attic spray foam in Manor typically runs from $1.50 per square foot for open-cell foam to $1.20 per board foot for closed-cell, depending on the thickness and R-value required by code and the size of the attic. A typical Manor attic might be 1,200 to 1,800 square feet. Wall injection foam for closed cavities runs from $2 per square foot. Crawl space sealing starts at $2,500. Insulation removal and replacement start at $2,800. Air sealing around rim joists and band joists starts at $650. The final cost depends on how much area you need covered, what R-value and thickness you specify, whether you are spraying open-cell or closed-cell foam, and whether old insulation has to come out first. Call us at (737) 404-4885 for a free estimate at your Manor address.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Manor and nearby areas.

My Manor home is new construction on a slab with a two-story layout and a bonus room over the garage. The bonus room never cools properly in summer. What is the problem?
The attic above the bonus room is likely uninsulated or poorly insulated, and the ductwork may be undersized or leaking. In a Manor summer, an uninsulated attic hits 140 to 160 degrees. That heat radiates down into the room. Closed-cell spray foam on the underside of the roof deck or on the attic floor stops the heat and seals air leaks. That room will cool, and your whole-house cooling bill will drop. Call us at (737) 404-4885 and we will assess it.
I had an insulation contractor spray foam in my Manor attic last year. It still smells and it never fully cured. What happened?
A failed cure is usually caused by incorrect material ratio, drum temperature that was too low, or no mechanical ventilation during the spray and cure. When the ratio is wrong, the foam does not cross-link and stays tacky and smelly. When ventilation is missing, the moisture in the air traps the cure. A bad installer might promise immediate re-entry to hurry you along. That is how you know something is wrong. Before any new foam goes in, the old material has to come out. We will remove it, air out the space, and spray it right with proper ventilation and a stated re-entry window of 24 to 48 hours. Call (737) 404-4885 to schedule a free assessment.
What does spray foam cost in Manor for a typical attic or crawl space?
Attic foam in Manor typically runs $1.50 per square foot for open-cell to $1.20 per board foot for closed-cell, depending on thickness and R-value. A 1,500-square-foot attic might run $2,250 to $3,600. Crawl space sealing starts at $2,500. Insulation removal and replacement start at $2,800. The exact cost depends on the area, the R-value and thickness you need, the foam type, and whether old insulation has to come out first. We give you a written estimate with all of that spelled out before any work starts. Call (737) 404-4885 for a free estimate.
What does the energy code in Manor require for attic insulation and thermal barriers?
The energy code and building code that apply to your Manor address (78653) are set by the City of Manor and enforced by the building official. R-value and thickness requirements, ignition barriers, and thermal barriers are all part of that code. The thermal barrier (a 15-minute fire rating) is the detail most contractors get wrong. When you pull a permit or get an inspection, the building official will tell you what applies to your job. You can contact the City of Manor website at https://www.cityofmanor.org for code questions and permit requirements. We follow the code that applies at your address and we work with the building department on inspections.
I live in my Manor home while the spray foam work is happening. Will the smell bother us? How long before we can use the space again?
During the spray and cure, we run mechanical ventilation to move the odor and moisture out of the space. We ask you to keep the area clear for 24 to 48 hours after the spray, which means staying out of the attic or not using a sealed crawl space during that window. The smell will fade over a few days as the foam fully cures. If you have an occupied bedroom near the work or a crawl space under living space, tell us when you call. We will coordinate the timing and ventilation to minimize disruption. Call (737) 404-4885 to discuss your specific situation.
Are you insured for spray foam insulation work at my Manor property?
Yes. We carry full general liability and workers' compensation insurance. Before any contractor starts work at your home, you should ask for proof of insurance and verify the coverage with the insurance company. We are happy to provide that documentation.
Summer cooling bills in Manor are brutal. When should I schedule spray foam insulation to get relief before the heat hits?
Spring is the best time to schedule attic foam in Manor. March through May, the weather is mild and the work is easier. By the time summer arrives in June, your attic is sealed and insulated, and the cooling load drops. If you wait until June or July when the heat is already here, you are already paying the penalty. If you are planning a winter project (crawl space sealing or wall injection), fall and early winter are ideal. We work year-round, but schedule early. Call (737) 404-4885 in February or March to get on the calendar for spring.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Austin

All your work handled by qualified professionals in Austin

Attic Spray Foam Insulation

Sealed attics that pull Austin ductwork in out of 150-degree heat

Included in your service

  • Open-cell foam on the roof deck; never just piled on the attic floor
  • Ductwork and attic water lines brought inside the envelope before the next hard freeze
  • Target R-value and thickness per pass written into the estimate
  • Gable and ridge details closed properly for a Central Texas attic
Learn more→

Closed Cell Spray Foam Insulation

Two-pound foam for August heat and the occasional hard freeze

Included in your service

  • R-6.5 per inch with its own built-in vapor retarder
  • The right call for Hill Country barndominiums and Hyde Park subfloors
  • Racked in controlled passes; never one thick lift
  • Depth gauged at the wall because a thin pass fails the first hard freeze
Learn more→

Open Cell Spray Foam Insulation

The friendlier board foot for Austin attics and interior walls

Included in your service

  • Half-pound foam that air-seals at a lower cost per board foot
  • Sound dampening for bedrooms; home offices and media rooms
  • Where a metal building or raised floor calls for closed cell; we say so
  • Shaved flush to the framing and the offcuts bagged out
Learn more→

Wall & Injection Foam Insulation

Closed walls filled without opening up an Allandale ranch

Included in your service

  • Small ports drilled along a mortar joint or under a siding course; then plugged and patched
  • Built for 1950s-60s ranches behind brick and limestone veneer
  • Priced room by room so you can start with the west-facing one
  • Every cavity probed for fill rather than assumed full
Learn more→

Crawl Space Spray Foam Insulation

Pier-and-beam undersides sealed against cold floors and humid air

Included in your service

  • Closed cell on the subfloor and the skirting
  • Common work on Hyde Park; Travis Heights and East Austin bungalows
  • Standing water and drainage fixed first or we decline the job
  • Full encapsulation and foundation leveling referred out; the insulation is ours
Learn more→

Rim Joist & Band Joist Spray Foam

The small job that finally fixes the room over the garage

Included in your service

  • Cantilevers and band joists sealed bay by bay on slab-built homes
  • No basements here; it is bonus-room floors and pier-and-beam rims that leak
  • Half a day on site and felt the same evening
  • Gun-applied into framing gaps a batt has never reached
Learn more→

Garage Spray Foam Insulation

Turning an Austin garage oven into square footage you can use

Included in your service

  • Ceiling bays under bonus rooms filled and shaved flush
  • Walls shared with the house sealed against radiant afternoon heat
  • Workshop conversions specified around the tools you actually run
  • The door header and slab edge addressed; not stepped over
Learn more→

Metal Building & Barndominium Spray Foam

The insulation that stops a Hill Country barndominium from sweating

Included in your service

  • Closed cell straight to the underside of the roof panels
  • Liberty Hill; Dripping Springs; Bastrop and Elgin barndominiums and shops
  • Condensation control settled before R-value is even discussed
  • Purlins and fastener lines sealed; not sprayed around
Learn more→

Commercial & New Construction Spray Foam

Austin warehouses and production builds kept on their own schedule

Included in your service

  • Shells and warehouses from east Travis County to the Taylor and Hutto corridor
  • Code-compliant assemblies documented for your inspector
  • Phased around occupied floors and the Central Texas build calendar
  • Ignition and thermal barrier requirements settled up front
Learn more→

Insulation Removal

In an Austin attic the old comes out before anything new goes in

Included in your service

  • Vacuumed straight to the truck and bagged; never buried
  • Insulation soaked by a burst attic pipe removed before it molds
  • Vermiculite flagged for testing and left undisturbed
  • The usual first step on 1950s-60s Crestview; Brentwood and Allandale ranches
Learn more→

Insulation Replacement & Re-Insulation

A full reset for Austin attics twenty years past their job

Included in your service

  • Removal; air sealing and new foam handled as one scope
  • For material left flattened or soaked by a burst pipe or roof leak
  • Built to current code R-values; not to what was there in 1978
  • One crew and one price with no handoff between trades
Learn more→

Air Sealing

The cheapest comfort fix in an Austin house and it comes first

Included in your service

  • Top plates; wiring chases; can lights and the attic hatch
  • Sealed before insulating so the R-value can actually perform
  • Thermal camera images before and after on a 100-degree afternoon
  • Priced as its own job; never bundled in to pad a quote
Learn more→
Verified client reviews

29+ Verified Client Reviews in Austin

⭐⭐⭐⭐⭐ 4.9/5 · 29 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Austin · Response within 24h · No commitment · ☎ (737) 404-4885

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Austin ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm